Ciena 3931 SERIES EQUIPMENT
Alcatel Lucent DMX 1665 – LNW59
REDUCING LEADTIMES
COST SAVINGS
LIFETIME WARRANTY
Multiple Parts Available & Ready to Ship with Lifetime Warranty
See Part List Below for a Sampling of Our Inventory
Don’t see what you’re looking for? Our Inventory is always changing, please contact us for current stock.
Dell EMC® Connectrix® EC-1700 cabinet
The Dell EMC® Connectrix® EC-1700 cabinet provides a central installation platform for mounting Connectrix B-Series and MDS Fibre Channel directors.
There are two models of the EC-1700 available: the EC-1700-B and the EC-1700-C. The EC-1700 model that should be used will depend upon the Connectrix products selected.
| EC-1700 Model | Products Supported |
| EC-1700-B | D-DCX-B, ED-DCX-4S-B, ED-DCX8510-8, & ED-DCX8510-4 |
| EC-1700-C | MDS-9718, MDS-9710, MDS-9706, MDS-9513, MDS-9506, MDS-9250i, ED-DCX6-4B and ED-DCX6-8B |
| EC-1700-C + MDS-BAFL-KIT | Directors: MDS 9513, MDS 9509, MDS 9506, MDS 9216, MDS 9718, MDS 9710, MDS 9706, and MDS 9222i |
EC-1700-B
The EC-1700-B, is designed to support the ED-DCX and ED-DCX8510 directors.
Features of the EC-1700-B cabinet include:
- Mechanical, power, and cooling capacity for up to 1100 ports of director-class Fibre Channel switching.
- The EC-1700-B is designed to optimize air-flow and cooling for the ED DCX-B and ED-DCX8510.
- Specially perforated front and rear doors to optimize air flow in and out of the cabinet.
- Fiber cable entry access through floor or ceiling via perforated top panels that are removeable.
- Open floor pan for airflow and cable egress.
EC-1700-B base configuration
The EC-1700-B comes from the factory with cable management fingers to support two fully populated directors or ED-DCX-B and ED-DCX8510 directors, ~1000 fiber cables. Also included are four 30amp single phase PDUs for connection of the ED-DCX and ED-DCX8510 power cords.
EC-1700-C expanded configuration
With the addition of the MDS-BAFL-Kit the EC-1700-C can support the addition of the MDS 9506, 9216, or 9222i with a 9509 or 9513 director. The additional baffles are required to maintain proper airflow and cooling of the larger 9513 and 9509 directors in the EC-1700-C when 9506, 9216, or 9222i products are installed in the same cabinet.
The expanded configuration capabilities support:
- One MDS 9509 or 9513 and up to two 9506s
- One MDS 9509 or 9513 and one 9506s and one 9216 or 9222i
- One MDS 9509 or 9513 and up to three 9216 or 9222i products
EC-1700-C
The EC-1700-C is designed to support the MDS 9513, MDS 9718, MDS 9710, MDS 9706, MDS 9509 and the ED-DCX6 director.
Features of the EC-1700-C cabinet include:
- Mechanical, power, and cooling capacity for up to 1100 ports of director-class Fibre Channel switching.
- The EC-1700-C is designed to optimize air-flow and cooling for the directors, therefore the default factory configuration is for support of two directors in the EC-1700-C.
- Fiber cable entry access through floor or ceiling.
EC-1700-C base configuration
The EC-1700-C comes from the factory with cable management fingers and trays to support up to three fully populated directors. 1000+ fiber cables.
Other base configuration equipment includes:
- Specially cut-out vertical NEMA mounting rails to provide air passages to the sides of the MDS directors.
- Pre-loaded directional air-baffles to direct hot exhaust air out the rear and top of cabinet.
- Specially perforated front and rear doors to optimize air flow in and out of the cabinet.
- Pre-loaded L-Brackets for mounting the directors into the EC-1700-C.
Each EC-1700-C cabinet can hold up to:
- Two MDS 9509 directors
- Two MDS 9513 directors
- One 9513 and one 9509
- Three MDS 9706 directors
- Two MDS 9710 directors
- One MDS 9718 director
- Two ED-DCX6 directors
